6 Core Alarm Cable is a low-voltage, multi-strand cable used to wire up burglar alarms, intruder detection systems, and other security equipment. It carries power and signals between the control panel, sensors, keypads, and sirens/bells.
The cable contains 6 individual wires (cores)…
6 Core Alarm Cable is a low-voltage, multi-strand cable used to wire up burglar alarms, intruder detection systems, and other security equipment. It carries power and signals between the control panel, sensors, keypads, and sirens/bells.
The cable contains 6 individual wires (cores) bundled together inside one outer sheath, each with its own colour. This lets one cable run carry several separate connections at once — for example, power plus a signal wire to a PIR sensor — instead of running multiple single cables.
| Feature | Typical Value | What it means for you |
|---|---|---|
| Number of cores | 6 | Enough conductors for most standard sensors, detectors, and keypads |
| Conductor material | Tinned copper (standard) or CCA/TCCA (budget option) | Tinned copper resists corrosion and carries current more reliably — worth checking before you buy |
| Conductor size | Approx. 0.16mm² – 0.20mm² (approx. 24 AWG) | Fine enough for low-voltage signal/data use, not for mains power |
| Insulation/Sheath | PVC (standard); LSF/LSZH available | LSF/LSZH releases less toxic smoke in a fire — often needed for commercial buildings |
| Sheath colour | Usually white (brown/black also available) | White blends into most walls and ceilings |
| Overall diameter | Approx. 3.5mm – 4.2mm | Slightly slimmer than 8 core — easier to route through tight conduit and cavities |
| Voltage rating | 50V – 500V depending on product (check datasheet) | Suitable for low-voltage alarm circuits only — not for mains electricity |
| Max current per core | Approx. 1 Amp (varies by product) | Sufficient for standard sensors, sirens, and keypads |
| Conductor resistance | Approx. 100–155 Ω/km | Lower resistance = better signal strength over longer cable runs |
| Operating temperature | -10°C to +70°C (varies by product) | Suitable for indoor and most loft space installations |
| Standard/Approval | BS 4737-3.30 (UK Intruder Alarm Standard) | Confirms the cable meets recognised UK security-industry standards |
| Brand | Prestige |
| Category | Intruder alarm systems |
| Sub Category | N/A |
| Condition | New |
| Color | White |
You might also like these items
